skip to Main Content

1.1 Box Build

If you are setting up the box for the Raspberry Pi Kit, here are the steps you need to follow.

Step 1: Glue the bottom of the box together. Use a tiny bit of glue on each tab. Let the box dry for at least 2 hours.

It should look like this:

Step 2: Screw the hinges

Step 3: Screw the hinges on to the top part of the box with the screen attached.  Be sure to insert the HDMI cable and the power cable for the screen through the appropriately sized holes.

Step 4: Put the side panel on the box lid.

Step 5: Put the top of the box on.

Step 6: Put the post screw with the wooden hinge on the side panel, make sure to align with the hole in the base.

Step 7: Fit the side panel with the hinge on the box and do the same thing on the other side.

Step 8: Connect the wooden hinge to the box with another post screw

Step 9: Put all the screws and square nuts on the sides of the box

And your done!!

WP2Social Auto Publish Powered By :
Back To Top